In the wilderness, a good fire is crucial. A good fire can cook food and keep you warm. In the event of a fire, a stove can purify water, make tools, and more. It can even be used to make a bowl out of hot coals. Bushcraft projects can range from simple to intricate, and you can even try your hand at harnessing fire from common materials like twigs and branches.
Making a feather stick
If you're planning to go on a wilderness excursion, you've probably wondered how you can make a feather stick. This simple tool is great to use when small fuel and sticks aren't available in the area. It can be used in a limited tree species environment above the tree line or inside a mountain cabin during the cold winter months. This bushcraft project requires some patience and persistence.
First of all, it's crucial to know how to select firewood. You can use dead standing wood like pine or cedar. Likewise, you can use twigs from a willow tree. These types of wood are usually easier to work with and will burn easily when whittled. If you don't have any wood on hand, look for dead twigs that aren't growing and are approximately two or three inches in diameter.
Making a deadfall trap
It's easy to make a deadfall trap. The trick is to lure your prey to it by baiting them. The best bait is something readily available, such as salt, as this will attract many types of animals, and will make them uneasy about being trapped. Then, tie the sticks together using the notches on the sticks. Make sure to make enough traps so that you can use several in a single day.
One of the easiest primitive traps you can make is a figure four deadfall trap. You will need three sticks, each approximately eight inches long, a sharp knife, and some bait. You can also use a piece of whittling paper or shoelace for the trap's hook. You can make two or three of these traps, but be sure to follow the instructions carefully, as you may need to adjust the length of the sticks to fit the deadfall.
Making a pot hanger
Among the many tasks you can do during a bushcraft project, making a pot hanger is a good example. This project can be used to hang many other things, such as lanterns and jackets. It can also be used to hang a guideline around the camp. It will come in handy when cooking over an open fire. And, it's a lot less expensive than buying a store-bought one!
A sturdy hook is a necessity for hanging pots over a fire. Make sure to choose a sturdy piece of wood, such as a tree or shrub with beak notches, to make hanging pots easier. Use only the largest, most robust stick to hang cast iron pots, and only carve down to half of the pith, as this will give it more strength. Then, attach the pot to hang it from the hanger.
Making a paracord rope
Regardless of the purpose, paracord can be used in many different bushcraft projects. Once you've purchased some paracord, you can make your own by following the directions in this article. First, cut the ends of the paracord rope one to 1.5 inches long. Next, cut the inner fibers with tweezers or a hemostat. Use a lighter to seal the ends. Once this is done, the ends of the paracord rope should be tied securely.
Another great use for paracord is in securing things. You can tie a sleeping bag, a camping mattress, or even a pillow to a paracord rope. This makes transporting these items much easier and less of a hassle. You can even use paracord to make a paracord bracelet for yourself! The possibilities are endless! If you're a survivalist or a bushcraft enthusiast, make paracord a part of your kit.
Did you miss our previous article...
https://bushcrafttips.com/bushcraft-tools/3-simple-plans-for-building-an-outhouse